Details

Powered by a Kubota diesel engine, this durable generator set produces 36.0 kilowatts of prime power output. The engine and generator are directly coupled and mounted on a rugged steel skid. All components are suitable for prime or intermittent usage. The entire set is thoroughly load tested prior to shipment. ETL approved construction.

Standard engine

• Kubota diesel model V3600T-E3BG, in-line, three-cylinder engine
• Mechanical speed governing provides > 5% speed regulation, no load to full load
• EPA “Interim tier 4”
• Liquid cooled with industrial grade radiator and belt-driven blower fan

Controls & accessories

• Key start panel with oil pressure, coolant temperature, hour meter, and glow plug indicator
• Manual safety shutdow override, fuse protection
• Safety shutdowns, energized-to-run, for low oil pressure/high coolant temperature
• Four anti-vibration mounts between generator set and base frame
• Electric fuel transfer and priming pump (12 VDC)
• Battery cables for 12 VDC starting system

Specifications

Engine technical information
Manufacturer	Kubota
Model	V3600T-E3BG
Cylinders	4
Bore x Stroke	3.86 x 4.72 in
Displacement	3620cc (220.9 cu in)
Comp. ratio	21.8:1
Engine weight	626 lb dry
Fuel system
Fuel type	#2 Diesel or #1 ULSD
Injection pump	Bosch PFR
Nozzle type	Throttle type
Transfer pump	Electric, 12 VDC
Fuel lift	1 meter (3.3 ft)
Suction fitting	3/8″ Male NPT
Return fitting	3/8″ Male NPT
Specific fuel consumption	2.50 gph @ full load1.30 gph @ half load(Actual fuel consumption varies with site conditions and fuel energy content.)
Lube oil system
Grade	API classification CF or other approved.(See owner’s manual)
Capacity	3.49 US gal
Filter	Full flow, spin on
Air intake system
Filter	Replaceable element
Combustion air	55.7 cfm
Total system restriction	20″ H20
DC Electrical system
Starter	12V, 3.0 kW
Alternator	12V, 90 Amp
Glow plugs location	Combustion chambers
Battery required	12V 650 CCA equiv, min
Run solenoid	12V Energize to run
Ancillary equipment
Mounting	Steel base with mounting holes
Isolators	Four composite mounts
Generator technical information
Manufacturer	Mecc Alte
Model	ECO 32
Construction	Four pole, brushless, open drip-proof (IP23), single bearing
Excitation	Dedicated auxilliary winding
Cooling air flow	39 m3/min
Leads	12
60 Hz voltages (continuous)	240 1-phase: 142.1 Amps208 3-phase: 118.5 Amps480 3-phase: 51.3 Amps
Power factor	Single phase ratings @ 1.0 PFThree phase ratings @ 0.8 PF
Voltage reg.	DSR digital type +/- 1% NL -> FL
Temperature rise	105C rise prime
Tel. interference	THF <2%
Winding pitch	Two thirds
Control system	Self-excited
Cooling system
Radiator	Finned tube type
Material	Copper core, soldered tanks
Pressure	12.9 psi max
Fan type	Blower, nylon
Water pump	Gear case mounted
Type	Centrifugal, belt drive
Thermostat	Wax pellet type
Recommended coolant	50/50Use low silicate ethylene glycol and high quality water. Consult manufacturer for details.
Cooling air required	3338 cfm
Exhaust system
Muffler type	Industrial grade
Mounting	Vertical with up outlet
Restriction	1.5 in Hg max
Weight & dimensions
Please contact salesperson for weight and dimensions.

Accessories

Coming soon…